Table of Contents
Advertisement
Parameters
Encryption
Enable 802.1x Authentication
After you finish with all security settings, please click "Apply" button.
If you want to reset all settings in this page, please click "Cancel" button.
After you clicked Apply, the following message will be displayed on your web browser:
You can click "Continue" to back to previous setup page to continue on other setup procedures,
or click "Apply" to reboot the router so the settings will take effect (Please wait for about 30
seconds while router is rebooting).
3.2.2.1 WEP
Select "WEP" for the "Encryption" mode if you wish to use WEP to encrypt your wireless
network.
Default
Description
You can choose Disable, WEP, WPA pre-share key,
WPA RADIUS for encryption mode.
IEEE 802.1x is an authentication protocol. Every user
must use a valid account to login to this Access Point
before accessing the wireless LAN. The authentication is
processed by a RADIUS server. Check this box to
authenticates user by IEEE 802.1x.
38
Advertisement
Table of Contents
