Airlink101 AR660W3G User Manual page 30

LAN IP section
Parameters
IP address
Subnet Mask
.1d
802 Spanning Tree
DHCP Server
DHCP Server section
Parameters
Lease Time
Start IP
End IP
DHCP Client Range
Static DHCP
Domain Name
Default Description
192.168.2.1 This is the router's LAN IP address (Your LAN clients
default gateway IP address).
255.255.255.0 Specify a Subnet Mask for your LAN segment.
Disable If you wish to activate 802.1d spanning tree function,
select "Enabled", or set it to "Disabled"
If 802.1d Spanning Tree function is enabled, this router
will use the spanning tree protocol to prevent from
network loop happened in the LAN ports.
Enable By enablting the DHCP server, the router will
automatically give your LAN clients an IP address. If the
DHCP server is not enabled then you'll have to manually
set your LAN client's IP addresses; make sure the LAN
Client is in the same subnet as this broadband router if
you want the router to be your LAN client's default
gateway.
Description
Please choose a lease time (the duration that every
computer can keep a specific IP address) of every IP
address assigned by this router from dropdown menu.
Please input the start IP address of the IP range.
Please input the end IP address of the IP range. Domain
Name (4): If you wish, you can also optionally input the
domain name for your network. This is optional.
You can configure a particular IP address range for your
DHCP server to assign IP addresses to your LAN
Clients.
Note: By default the IP range is from: Start IP
192.168.2.100 to End IP 192.168.2.200. If you want your
PC to have a static/fixed IP address then you'll have to
choose an IP address outside this IP address range.
Specify the Static DHCP Addresses for your LAN clients.
Enter the domain name of your LAN interface if there is
one.
31