Connect The Router - Airlink101 AR325W Quick Installation Manual

Section 1
This Quick Installation Guide only provides the basic instructions. For more
detailed information, please refer to the user's manual on the supplied CD.
Note: Prior to connecting the router, be sure to power off your computer, DSL/Cable modem, and the
router.
Step 1 Connect one end of a network cable to the WAN port of the router and connect the other end of
the cable to the DSL/Cable modem.
Step 2 With another network cable, connect one end of the cable to your computer's network card and
connect the other end to one of the LAN ports of the router.
Step 3 Power on the DSL/Cable modem and wait for the lights on the modem to settle down.
Step 4 Power on the router by connecting one end of the supplied power adapter to the power jack of the
router and connecting the other end to an electrical outlet.
Step 5 Power on your computer.
Step 6 Make sure the WAN and the LAN port that the computer is connected to are lit. If not, try the
above steps again.

Connect the Router