Airlink101 AR325W Configuration Manual

Airlink ar325w

Hide thumbs Also See for AR325W:

Download this manual See also: User Manual

How to configure Wireless Bridge with AR325W router?

1. Make sure the firmware is upgraded to R1.97e4 or above. You may go to the router's

configuration page => Toolbox => Firmware Upgrade to check the firmware version.

2. Go to Basic Setting => Wireless => WDS Setting to configure Bridge mode.

Need help?

Do you have a question about the AR325W and is the answer not in the manual?

Page 1 How to configure Wireless Bridge with AR325W router? 1. Make sure the firmware is upgraded to R1.97e4 or above. You may go to the router’s configuration page => Toolbox => Firmware Upgrade to check the firmware version. 2. Go to Basic Setting => Wireless => WDS Setting to configure Bridge mode.
Page 2 AP, click Save and Reboot buttons to make your changes effective. Please note that the labeled Mac address of AR325W is WAN Mac address, its LAN/WLAN Mac address usually is 1 plus the WAN Mac address. 4. Disable the DHCP server by selecting Disable and click Save and Reboot.
Page 3 5. Your Wireless Bridge is now ready to use. Bridge (WDS) only works with the same model (AR3325W). You may use a pair of the bridge to connect your remote networks wirelessly. Please use one of the LAN ports of AR325W to connect the Bridge to your network.