Moving The Scanner; Handling - Canon imageFORMULA DR-6030C User Manual

If you have any questions regarding the power supply, contact your
local authorized Canon dealer or service representative for further
information.

Moving the Scanner

When moving the scanner, always hold it with both hands to avoid
dropping it. The scanner weighs approximately 21.8 lb (9.9 kg)
alone.
Make sure to disconnect the interface cable and power cord. If the
scanner is transported with these items plugged in, the plugs and
connectors may be damaged due to physical shock.

Handling

WARNING
Note the following precautions whenever using the scanner. Failure to
do so may result in a fire or electric shock.
Never use alcohol, benzene, paint thinner, aerosol sprays, or any
other highly flammable substance near the scanner.
Do not cut, damage, or modify the power cord. Do not place heavy
objects on the power cord, and do not pull or excessively bend the
power cord.
Never connect the power cord when your hands are wet.
Do not connect the scanner to a multi plug power strip.
Do not knot or coil the power cord as this may result in a fire or
electric shock. When connecting the power cord, make sure that the
power plug is securely and completely inserted into the power
outlet.
The supplied power cord set is intended for use with this scanner
only. Do not use it with other electronic equipment. In addition, do
not use power cord sets other than the one supplied with the
scanner. Doing so may result in fire or electric shock.
Do not take the scanner apart or modify it.
Never try to take the scanner apart or modify it in any way, as this
is dangerous and may lead to a fire or electric shock.
Do not use flammable spray near the scanner.
When cleaning the scanner, push the power button to turn it OFF
and disconnect the power cord from the power supply.
Clean the scanner using a slightly dampened cloth which has been
well wrung out. Never use alcohol, benzene, paint thinner, or any
other flammable substances.
If the scanner makes strange noises, or gives off smoke, heat, or
strange odors, or the scanner does not function or other
abnormalities occur when you use the machine, immediately push
the power button to turn it off, and disconnect the power plug from
the power outlet. Then, contact your local authorized Canon dealer
or service representative to have the unit serviced.
Do not drop the scanner, or subject it to impact or strong shock.
Should the scanner ever become damaged, immediately push the
power button to turn it OFF, and disconnect the power plug from the
power outlet. Then, contact your local authorized Canon dealer or
service representative to have the unit serviced.
Before moving the scanner, be sure to push the power button to turn
it OFF, and disconnect the power plug from the power outlet.
To customers with cardiac pacemakers
The scanner generates a weak magnetic field. If customers using
cardiac pacemakers experience any abnormalities, move away
from the scanner and consult a physician.
15