Canon imageFORMULA DR-6030C User Manual page 25

When scanning business cards, plastic cards, or other documents
you do not want to bend, open the straight path tray (straight
path).
For details on the eject methods for each document type,
p. 22).
4
If you are scanning long documents with the U-turn path,
attach the document eject guide supplied with this
scanner.
For details, see p. 23.
5
Adjust the document guides to fit the width of the
document to be scanned.
(See
Straight path
6
Place the document.
After placing the document, align the document guides with both
edges of the document.
When scanning small or short documents, adjust the document
guides 2 to the edges of the documents.
IMPORTANT
• Do not place the documents on top of the scanner to align them.
Doing so may cause a malfunction.
• When placing documents into the feed tray, take care not to cut
your hand on the edges of the paper.
• Make sure that the document does not exceed the loading limit
marks ( ) on the document guides. Up to 100 pages of
ordinary plain paper (80 g/m2) can be loaded at the same time.
• Before you place a document, check to make sure it does not
contain paper clips, staples, or other small metal objects. These
items may cause a fire or electrical shock, damage the
document, or cause a paper jam or scanner malfunction.
• Do not wear loose clothing or jewelry that may get caught in the
scanner while you are using it, as this may result in personal
injury. Be extra careful of neckties and long hair. If anything gets
caught in the scanner, immediately turn OFF the power switch,
and disconnect the power cord from the power outlet to stop
canning.
• Always smooth out any folds or curls in your documents before
placing them into the feeder. If the leading edge of a document
is curled, it may cause a paper jam.
25