4
Select the time period from the following [After 10 secs]
(factory set default), [After 10 mins] or [After 1 hour].
5
Click [OK] to close the scanner properties.
Auto Power Off Setting
The scanner automatically turns off if 4 hours elapse without scanning
or another operation being performed.
To disable this setting, follow the procedure below.
IMPORTANT
Log on to Windows as an Administrator.
1
Click the Start button, and then click [All Programs],
[Canon DR-6030C], and [Canon imageFORMULA Utility].
imageFORMULA Utility starts.
Hint
In Windows 8.1, it is registered at the following location.
58