Canon imageFORMULA DR-6030C User Manual page 49

3
Press the start button for about two seconds.
The shading boards come out above the platen rollers (upper and
lower).
4
Wipe the shading boards with a firmly wrung cloth
moistened with water.
IMPORTANT
Wipe both the upper and lower shading boards.
5
Clean the rollers because dust from the rollers may
adhere on the shading boards. Wipe the rollers with a
firmly wrung cloth moistened with water.
6
Press the stop button.
The shading board goes back in.
7
Close the upper unit slowly. Be sure that the upper unit is
completely closed by pushing on both edges with both
hands until you hear a click.
Shading Boards
IMPORTANT
Do not force the upper unit to close. Doing so may damage the
scanner.
49