Error Messages/Troubleshooting - Microlife PF100 Instruction Manual

memory.
• In order to download the data from your device, a user
profile must be created (minimum required data: Family
Name, Given Name, and ID).
• The ID can be any name, or combination of symbols.
7.

Error Messages/Troubleshooting

If you get a low reading this could be an early warning sign
your condition is getting worse. You must follow directions
exactly as instructed to obtain accurate results.
Call Microlife with questions at 866-934-1839, M-F 8 AM–8
PM Eastern Time.
If an error occurs one of the following listed error codes is displayed.
Message Cause
Er1 The result can not be
stored in memory
because date/time is
not set.
no
There is no data
stored in the Monitor
The result is higher
Hi
than 900 ml/min.
Remedy
Please set date and time
(Section 4.2)
Set the time and date and
take a reading.
Unit malfunction, please
repeat the measurement.
23