*HQHUDO LQIRUPDWLRQ
1.4. Calibration scales and correct axis position
&RQWLQXHG
&DOLEUDWLRQ VFDOHV ,5%
When axis 3 is put in calibration position, the mark on the calibration plate is visible above
the mechanical stop, as shown in the figure below.
xx0500002485
A
B
C
D
E
16
Mechanical stop of axis 3
Calibration mark on calibration plate, axis 3
Calibration plate and marking, axis 6
Punch, axis 1, 3HAB8223-1
Punch, axis 2, 3HAB8223-1 (1 marking)
&RQWLQXHV RQ QH[W SDJH
3HAC 16578-1 Revision: E