AIPTEK Pocket DV3300 User Manual page 38

Installing the driver (for 98SE)
(continued)
3.
The Install Shield Wizard will then appear and
automatically install the
program. Please click on
Next to continue the
installation.
4.
After the driver installation is completed, the program
will prompt you to install Direct X 8.0 or above. If you
are not sure if this program has been installed in your
computer, please click Yes to continue.
The program Direct X 8.0 or above is necessary for viewing
the AVI movies recorded by the camera.
5.
After the installation is completed, you may need to
restart your computer for the driver to take effect.
After rebooting your computer, please connect the camera to
the PC and select DISK (removable disk) mode to capture
the device.
~ 36 ~