Advertisement
Preparing for use/Cartridge replacement
1. Remove the old cartridge.*
2. Wash the filter and rinse thoroughly.
3. Dip cartridge in water for 5–10 minutes. Tap on the cartridge to make the air rise.
4. Place the cartridge in its socket.
5. Start filling the pitcher with water, then discard the first jugful of purified water. Repeat one more time.
6. The filter is ready for use.
* If your filter was already in use
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2016
3
Advertisement
