Solution App - Hama 176547 Operating Instruction

• Dim by X%
'Alexa/OK Google, decrease the llight to X%.'
• Selection of colour temperature or colour
'Alexa/OK Google, turn the light warm white.' (red, white,
etc.)
4.1.2 Integrating lamps in the Hama Smart Solution
app
• Twist the smart lamp into a suitable fixture.
• The smart LED lamp should begin to flash quickly. If this
is not the case, quickly turn the lamp ON and OFF three
times using the light switch.
• Now open the Hama Smart Solution app and log in.
• Press + in the upper-right corner (Pic 1) to add a new
device.
• Select Lighting in the list and then select the device you
want to integrate.
• Now confirm that the lamp flashes quickly (Pic 2).
• .
Pic 1
• Next enter your WiFi password and confirm with OK.
• Your lamp will now be connected.
Pic 3
6
Pic 2
Pic 4
• Once the connection has been established, the lamp
stops flashing and the app confirms that your lamp was
connected. You can now give your lamp a name.
• Click Finish (Pic 4) to complete the process.
• Now you can control the lamp.
• Various options are available to you (see Pic 5):
- White Mode (Pic 6)
Setting the brightness
- Colour Mode (Pic 7)
Colour selection using the outer ring
Setting the saturation of the selected colour
Setting the brightness of the selected colour
- Scene Mode (Pic 8)
Selection of various light colour modes, for example,
reading or night mode
Pic 5
Pic 7
Pic 6