Integrating Devices In The Hama Smart Solution App; Wifi Camera; Product Features - Hama 176547 Operating Instruction

4.5.3 Integrating devices in the Hama Smart Solu-
tion app
• The LED begins to flash blue quickly. If it flashes slowly or
not at all, press the Pairing button for 5 seconds.
• Open the app and log in.
• Press + in the upper-right corner to add a new device.
• Select Sensors in the list and then select your device.
• Now confirm that the LED flashes quickly.
• Next enter your WiFi password and confirm with OK.
Your sensor will now be connected.
• Once the connection has been established, the LED stops
flashing quickly and the app confirms that your sensor
was connected. You can now give it a name.
• Click Finish to complete the process.
• You can now fit the sensor and then configure it.

4.6 WiFi camera

4.6.1 Product features

Note
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• Connect the product only to a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
• Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts.
• Do not continue to operate the device if it becomes
visibly damaged.
• The product is intended for indoor use only.
• Keep this product, as all electrical products, out of the
reach of children!
13