1. Read first • Children are not permitted to play with the device. Children may not clean the product or perform user Thank you for choosing a Hama product. maintenance without supervision. Take your time and read the following instructions and •...
2.4 GHz network. • A mobile device (smartphone, tablet, etc.) that is WiFi/ WLAN-enabled and connected to your home network • The Hama Smart Solution App, installed on your mobile device *Does NOT affect the motion detector 00176554 3.1 Preparation...
2.4 GHz network, you can add your smart product using the compatibility mode (Access Point mode). To do so, open the Hama Smart Solution app and click + at the top right. Next select the device you want to integrate, and, in the upper-right area, select ‘Otherwise’.
Setting the brightness of the selected colour • Now open the Hama Smart Solution app and log in. - Scene Mode (Pic 8) • Press + in the upper-right corner (Pic 1) to add a new Selection of various light colour modes, for example, device.
5 seconds. Risk of electric shock • Now open the Hama Smart Solution app and log in. Do not open the product. Do not continue to operate • Press + in the upper-right corner to add a new device.
• Press and hold the button on the front side for approx. 5 seconds until the blue LED begins to flash quickly. • Open the Hama Smart Solution app and log in. • Press + in the upper-right corner to add a new device.
• Next enter your WiFi password and confirm with OK. Battery compart- Pairing- • Your power socket will now be connected. ment closure button Manipulation protection 4.4.2 Mounting • We recommend attaching the sensor on the window or door frame and the device directly on the window or door. •...
• Open the app and log in. • Press + in the upper-right corner to add a new device. 4.4.3 Integrating devices in the Hama Smart Solu- • Select Sensors in the list and then select your device. tion app •...
• Next enter your WiFi password and confirm with OK. • Your sensor will now be connected. 4.5 WiFi Motion Detector • Once the connection has been established, the LED stops 4.5.1 Product features flashing quickly and the app confirms that your sensor was connected.
4.5.2 Mounting Warning - Batteries Warning • When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries accordingly. • Before mounting, check that the wall you have chosen Failure to do so could result in the batteries leaking or is suitable for the weight to be mounted.
4.5.3 Integrating devices in the Hama Smart Solu- tion app • The LED begins to flash blue quickly. If it flashes slowly or not at all, press the Pairing button for 5 seconds. • Open the app and log in.
• We cannot guarantee that residue will not be left on the mounting surface after the adhesive pad is removed. 4.6.3 Integrating devices into the Hama Smart Solution app • Connect the WiFi camera to the USB cable supplied and the power supply unit.
• The LED light strip begins to flash quickly. If this does not happen, quickly disconnect and reconnect the power supply unit three times. • Open the Hama Smart Solution app and tap ‘My home’ at the lower-left edge of the screen.
• Then tap ‘+’ at the upper-right edge of the screen. • ‘Schedule’ allows you to schedule when the light strip Select the ‘Switches’ category followed by item number automatically switches on. ‘00176568’. Note • Tap ‘OK’ to confirm that the LED light strip is flashing If the colours blue and green are displayed in the quickly.
• If you have already created groups and/or scenes in the • ‘Select Smart’ allows you to execute/activate a scene Hama Smart Solution app, you might not be able to (1-click control) or an automation. use them in the Alexa app.
• Now click the category Have something already set up? (Pic 10) (If necessary, the app will now update.) • Now select Hama Smart Solution (Pic 11) in the list and log in with the data for your app. • Confirm with Link now (Pic 12), and in the next list confirm Hama Smart Solution once more (Pic 13).
Page 19
In the case of products that have a switch (such as the What should I do if the device is displayed as socket, for example) but no reset button, you normally offline? press and hold the switch for 5 seconds. 1.
How can I deactivate a countdown after it has been 9. Technical Data set? WiFi-LED Light 176547 Set the countdown to 0 hours 0 minutes; this will deacti- Light output 806 lm vate it.
Page 21
USB frequency band Frequency band / 2,4 GHz 2,4GHz frequency bands Maximum emitted 92,16 mW Degree of protection IP 20 (indoor use) transmitting power WiFi Door / WiFi-Lampen 176548 176553 Window Contact Light output 300 lm Power supply 2 x AAA Batteries, 3V Output 4,5 W Frequency band /...
Maximum emitted 11. Warranty Disclaimer 0,0931 W transmitting power Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ WiFi camera 176566 mounting, improper use of the product or from failure to Power supply 1 A über USB...
Page 24
Hama GmbH & Co KG 86652 Monheim / Germany Service & Support www.hama.com +49 9091 502-0 All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
Need help?
Do you have a question about the 176547 and is the answer not in the manual?
Questions and answers