Timer, 1-Click Control And Automation; Timer; 1-Click Control And Automation - Hama 176547 Operating Instruction

• Then tap '+' at the upper-right edge of the screen.
Select the 'Switches' category followed by item number
'00176568'.
• Tap 'OK' to confirm that the LED light strip is flashing
quickly.
• Then enter the name of your WiFi network and the
password. Tap 'OK' to confirm your entries.
• The WiFi controller is now connected to the app. Once
the connection has been established, the LED light strip
stops flashing. You can now give the controller a name.
• Click 'Finish' to complete the process.
• You can now set up, control and configure the WiFi
controller using the app.
• 'White' allows you to specify that white light should be
emitted.
• 'Color' allows you to change the colour, brightness and
saturation of the light strip.
• 'Scene' allows you to set up automated colour changes.
• 'Music' allows you to make the LED controller react to
background music.
16
• 'Schedule' allows you to schedule when the light strip
automatically switches on.
Note
If the colours blue and green are displayed in the
opposite sequence to in the app, disconnect the
controller from the power, and connect the supplied
adapter cable between the controller and the LED light
strip.
5. Timer, automation and 1-click control

5.1. Timer*

To access the Timer area, click the Schedule button.
Here you can program the device to switch on or off at
particular times.
• Press Add Timing.
• In the upper area, select the desired time; then select
whether you would like to execute the command
repeatedly and, lastly, whether the smart product should
switch on or off at this time.
• Confirm your programming by pressing Save in the
upper-right area.
• You can also add a comment and have an execution
message output on your mobile phone.
* Does not apply to the window/door contact 00176553,
the motion detector 00176554 or the camera 00176566

5.2 1-click control and automation

• 1-click control is used to control multiple devices with
one click, or by voice command with an AI speaker.
With automation, tasks and settings can be executed
automatically based on conditions (for example, sunset
at 19:00 hrs ¨ floor lamp controlled using smart socket
switches on).
• Press Smart in the bar at the bottom and then press + in
the upper-right area.