Case CX130 Manual page 18

Only on CX130 machines with 3 m dipper
Point B
Point A
A A
H
Point A: Working position
Point B: Transport position
A
B
C
D
E
F
G
H
I
J
K
L (with 500 mm track pads)
L (with 600 mm track pads)
L (with 700 mm track pads)
M
CASE TRAINING CENTER
AUGUST 2000
GENERAL INFORMATION
MACHINE OVERALL DIMENSIONS
C
H G
I
D
C
2.10 m
2.74 m
2.74 m
7.48 m
3.54 m
2.52 m
0.894 m
2.04 m
5.44 m
2.78 m
1.99 m
0.50 m
2.49 m
2.59 m
2.69 m
0.46 m
IMPORTANT: For CX130 machines with 3 m dipper, it
is imperative that the dipper cylinder head/dipper
linkage is positioned at point B.
NOTE: Never work with the pin in this position.
WARNING: When the dipper cylinder is
placed in position B (transport), take care
not to damage the cab, there can be
!
interference between the bucket and the
F
cab.
CS00E527
CX130
Dipper
2.50 m
2.74 m
2.74 m
7.49 m
3.54 m
2.52 m
0.894 m
2.04 m
5.45 m
2.78 m
1.99 m
0.50 m
2.49 m
2.59 m
2.69 m
0.46 m
1 - 14
3.00 m (A) 3.00 m (B)
3.26 m 2.78 m
2.74 m 2.74 m
7.38 m 7.54 m
3.54 m 3.54 m
2.52 m 2.52 m
0.894 m 0.894 m
2.04 m 2.04 m
5.34 m 5.50 m
2.78 m 2.78 m
1.99 m 1.99 m
0.50 m 0.50 m
2.49 m 2.49 m
2.59 m 2.59 m
2.69 m 2.69 m
0.46 m 0.46 m