Accessories - Dantherm HCV 300 Manual

INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Product description: Accessories

Accessories

Introduction
The unit is supplied without mounted accessories.
If additional functionality is requested, the accessories must be installed prior to the first
installation of the unit or, alternatively, after commissioning.
Silencer
The HCV 400/460 unit can be equipped with a silencer.
(HCV 400/460
only)
Electrical pre-
The unit can be equipped with an electrical preheating element that preheats the incoming
heating
air. The preheater increases the outside air temperature going into the heat exchanger, and
thereby reduces the risk of ice in the heat exchanger in very cold conditions.
Heating coil The water heating coil is controlled by the HAC 2 control unit (accessory).
The water heating coil increases the supply air temperature.
Floor bracket
The unit can be raised up on a floor bracket for
(HCV 400/460
easy access to the drain.
only)
Handheld remote
Adjust the ventilation and keep
control
track of the home's humidity and
(HRC 3)
temperature using the large LCD
screen on the handheld remote
control.
Activate cooling function/bypass
(if installed in the HCV unit). Select
the steps for manual ventilation or
relevant weekly programs or set the
controller to automatic control.
The remote control can communicate with an HCVunit at a distance of up to 30 metres. The
remote control can be placed on horizontal surfaces or hung on the wall.
AUTO
* *
CO 
2
°
RH%  ° °
°
Ikoner for manual
21