Magtek ExpressCard 3000 Preventive Maintenance Procedure page 22

3 - Preventive Maintenance Procedure (EC3000)
11) Move the hammer follower out of the way and add 2 drops of lubricant to the top and to the front of
the top punch hammer.
12) Add 2 drops of lubricant to the left and right sides of the shaft that holds the bottom embosser
knuckle, between the sides of the knuckle and the rocker arm.
13) Add 2 drops of lubricant between bottom punch hammer and bottom hammer follower.
ExpressCard 3000| Instant Issuance Card Personalization System | Preventive Maintenance Procedure
Page 22 of 24 (D998200294-10)