Multi-Zone Tower Light
with Audible Alarm
PN #3015-6143
For more detailed product information, scan here
or visit www.mybacharach.com to access the
Multi-Zone User Manual (P/N: 3015-5074).
1. Introduction
The Multi-Zone Tower Light is a three color tower light that can be
wired into the alarm and fault relays of the Multi-Zone for enhanced
visual and audible alarming. The tower light includes a 90 dB omni-
directional audible alarm.
Please read and strictly follow the contents of this document for
information on the installation of tower light.
2. Safety Instructions
WARNING: Make certain that the power source is
disconnected (Circuit Breaker or Fused Disconnect Switch)
from the Multi-Zone before installing the Multi-Zone
Tower Light. Failure to do so presents an electrical shock
hazard to personnel and could damage to the Multi-Zone
and the Multi-Zone Tower Light.
3. Installation
1.
Install the tower light into one of the knock-out holes in
the top of the Multi-Zone, securing it using the provided
gasket and mounting nut.
2. Install the modified Multi-Zone power harness into
locations show in the picture below.
Installation
Guide
Black
Red
Gasket
The end of the power harness with the loose leads (RED
and BLACK) should be landed on the jumper on the main
controller board.
Red
Yellow
Green
Mounting Nut
(Inside Enclosure)
Connect to Power
Supply 12VDC Header
End of Power Harness
with Loose Leads
Flying Leads
PN #3015-6142 REV 2