Table of Contents
Advertisement
8-6.
Daily Care
Accurate measurements can not be made if the temperature detection part is dirty. It should be kept clean when
performing measurements.
Avoid rubbing it when the main body is dirty. Instead, rinse the dirt off using water.
When the dirt is heavy, wipe it off gently using a kitchen sponge, etc., dampened with ph-neutral detergent.
Do not use abrasives or volatile solvents such as thinner or benzine, etc.
8-7.
Specifications
Sensor
Temperature measurement range
Display resolution
Measurement accuracy
Display refreshment interval
Waterproof level
Power supply
Battery life
Operating temperature and humidity : 0 to 40℃, 75%RH or less
Storage temperature and humidity
External dimension of the sheath
External dimension
Weight
Standard accessory
: Thermistor
: -40.0℃ to +260.0℃
: 0.1℃
: ±1.0℃ (-9.9 to 59.9℃)
±2.0℃(-19.9 to -10.0℃, 60.0 to 99.9℃)
±3.0℃(-29.9 to -20.0℃, 100.0 to 199.9℃)
±4.0℃(-40.0 to -30.0℃, 200.0 to 260.0℃)
: Every one second
: JIS IPX7 (Waterproof for 30 minutes at a water depth of 1 meter, still water at room
temperature)
: CR2032 x 1 pc
: Approx.1 year (When used for one hour per day)
(No condensation) (Excluding the sheath)
：0 to 50℃, 75%RH or less
(No condensation)
: Φ2.8mm (The tip is Φ2.2mm, the length is 20 mm),Approx. 120mm
: 40(W) x 187(H) x 17(D) mm (The protrusion is not included.)
: Approx. 27g (The battery and sheath holder is included.)
: Instruction manual, sheath holder, battery (For monitor battery)
17
Advertisement
Table of Contents
