Table of Contents
Advertisement
Resetting the maximum and minimum temperature memory
Reset the maximum and minimum temperature memory as follows:
Press the [MAX/MIN] button to display the maximum or minimum temperature. Press the [MAX/MIN] button again
and hold it for more than two seconds. The display goes into the bar display, and the stored the maximum and
minimum temperatures are reset to store new maximum and minimum
temperatures.
.
About the auto power off function and turning the power off
(1) Auto power off function
The device has the auto power off function.
The auto power off function is disabled when the battery has been
To enable the auto power off
right on the display to show that auto power off function is now enables. With the auto power off function, the
device automatically turns the power off when no operation is made for about five minutes. To disable the auto
power off function, press the [AUTO OFF] button again.
The "AUTO" at the upper right on the display disappears, and the auto
power off function becomes disabled.
(2) Turning the power off
Press the [ON/OFF] button when you would like to turn the power off immediately.
How to use the sheath holder
Use the sheath holder to protect the sheath when you carry the device.
Be sure the sheath holder is removed from sheath when performing measurements.
In order to prevent the sheath holder from bring deformed or damaged, let the sheath return to the room temperature
before putting the sheath holder on after performing high or low temperature measurements.
function,
press the [AUTO OFF] button one time. The "AUTO" appears at the upper
replaced.
16
℃
ＭAX
AUTO
℃
Advertisement
Table of Contents
