Operating The Thermometer - A&D GXA-14 Instruction Manual

8-5.

Operating the Thermometer

Measuring the temperature
(1) Press the [ON/OFF] button to turn the power on.
(2) Remove the sheath holder when it is attached to the sheath.
(3) Measure the temperature by one of the following methods depending on the material to be measured.
When measuring the liquid
Immerse the sensor into the position where you would like to measure the
temperature.
When there is steam arising from the liquid, handle the device so that the
display is not exposed to the steam. Otherwise the steam may damage the
device.
When measuring the semisolid material
Stick the sensor to the depth where you would like to measure the temperature
in the material.
Attempting to forcibly stick the sensor into the material when the measurement
material is too solid may damage the sheath. In such case, a device that
enables smooth insertion of the sensor is required.
When measuring the gas
Place the sensor in the location where you would like to measure the temperature and wait until the display
becomes stable.
When measuring a high temperature atmosphere such as steam, use a shield to protect the display from high
temperature.
Gas Shield
14