A&D HJ-150 Operating Instructions
A&D HJ-150 Operating Instructions

A&D HJ-150 Operating Instructions

Compact scale

Advertisement

Cautions
Avoid installing / leaving the scale in direct sunlight / high humidity.
Place the scale on a flat and solid surface in a place free from wind.
Avoid vibration, strong electric or magnetic fields and rapid changes in
temperature or humidity.
Avoid using the scale near other electronic equipment.
Do not mix the battery types. Replace all of the batteries at same time.
If the scale is not to be used for a long period of time, remove the batteries.
Avoid over / shock load that could cause damage to the scale.
Keep the protective cover attached when you carry the scale.
Wait for more than 6 seconds to let the scale warm up after turning on
the power.
When the location to be used or the ambient environment has changed,
calibrate the scale before use.
When the display shows lo , or continues to show 8. 8 . 8 . 8 more than
30 seconds after turnig on, replace the batteries with new one.

Specifications

Capacity: 150 x 0.1 g / 5.29 x 0.01 oz
Linearity: ±0.2 g
Operating environment: 5
Display: 7 segment LCD with backlight (Character height 8 mm)
Power: 2 x "AAA" size batteries, approx. 80 hours with alkaline batteries.
Pan size: 60 (W)x 64 (D) mm / 2.36 (W) x 2.52 (D) in.
Accessories : Instruction manual, 100g weight, 2 monitor batteries
ON/ZERO/OFF
HJ-150 Compact Scale

Operating Instructions

Repeatability: 0.1 g (Standard deviation)
C ~ 40
LCD
C (41
F ~ 104
Weighing pan
Battery cover
Open
+
Battery
LIGHT/CAL
g / oz
1
F), less than 85% RH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HJ-150 and is the answer not in the manual?

Questions and answers

Summary of Contents for A&D HJ-150

  • Page 1: Operating Instructions

    HJ-150 Compact Scale Operating Instructions Cautions Avoid installing / leaving the scale in direct sunlight / high humidity. Place the scale on a flat and solid surface in a place free from wind. Avoid vibration, strong electric or magnetic fields and rapid changes in temperature or humidity.
  • Page 2 Switches ON/ZERO/OFF Switch: Press to turn the scale on. In the operation mode, press briefly to set the display to zero. Press and hold approximately 3 seconds to turn the scale off. LIGHT/CAL Switch: In the operation mode, press briefly to turn the LCD backlight on. Press and hold approximately 3 seconds to enter the calibration mode.
  • Page 3 Place the objects to be weighed on the pan or in the container. Wait for the display to become stable and read the weight. means overload. Remove the objects from the pan immediately. Automatic power-off function The automatic power-off function turns power off after approximately 2 minutes of stable display during the object(s) applied.
  • Page 4 3-23-14 Higashi-Ikebukuro, Toshima-ku, Tokyo 170-0013 JAPAN Telephone: [81] (3) 5391-6132 Fax: [81] (3) 5391-6148 A&D ENGINEERING, INC 1756 Automation Parkway, San Jose, California 95131 U.S.A. Telephone: [1] (408) 263-5333 Fax: [1] (408)263-0119 A&D INSTRUMENTS LIMITED <UK Office> Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485...

Table of Contents