Related Manuals for Pulsar BNC08128
Summary of Contents for Pulsar BNC08128
- Page 1 BNC08128 v.1.0 BNC 12V/8x1A Switch mode power supply unit for CCTV. EN** Edition: 1 from 26.11.2013 Supersedes the edition: ------...
- Page 2 1. Technical description. 1.1. General description. The PSU BNC08128 is intended for uninterrupted supply of CCTV systems requiring stabilized voltage of 12V DC . The output voltage can be adjusted with a potentiometer between 12V and 15V DC. The power supply unit enables transmitting power and video using a 75 ohm coaxial cable integrated with two power wires (YAP type).
- Page 3 GREEN POWER CCTV BNC www.pulsar.pl BNC08128 1.3. The description of components and connectors of the PSU. Table 1. Component No. Description [Figure 2] LED optical indication: [1], [11] green L – indication of voltage at the IN input red L –...
- Page 4 GREEN POWER CCTV BNC www.pulsar.pl BNC08128 Figure 3. The view of the PSU. Component No. Description [Figure 3] The module of the switch mode PSU LED light indicating correct operation of the switch mode PSU ADJ potentiometer - regulation of the power supply output voltage in the range of 12V÷15V DC...
- Page 5 GREEN POWER CCTV BNC www.pulsar.pl BNC08128 Antisabotage protection: - TAMPER output indicating enclosure opening - microswitch, NC contacts (enclosure closed), 0,5A@50V DC (max.) Optical indication of operation: YES – LED lights Technical outputs: - FPS technical output indicating output fuse - OC type, 50mA max.
- Page 6 GREEN POWER CCTV BNC www.pulsar.pl BNC08128 Moreover, the user should be informed how to disconnect the power supply unit from the mains supply (usually by assigning an appropriate fuse in the fuse box). The electrical system shall be made in accordance with applicable standards and regulations.
- Page 7 GREEN POWER CCTV BNC www.pulsar.pl BNC08128 RED LED: • on – DC voltage at the output of the switch mode PSU • off – no DC voltage at the output of the switch mode PSU RED LED: • on – fuse failure at one of the AUX1…AUX8 outputs •...
- Page 8 GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (manufacturer) grants a two-year quality warranty for the equipment, starting from the production date. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (selected by the manufacturer) if the malfunction is due to the manufacturer.
Need help?
Do you have a question about the BNC08128 and is the answer not in the manual?
Questions and answers