Maintenance And Cleaning - Westfalia JSD80S Instruction Manual

The spray gun does
not sound "right"
during operation
"Orange Skin",
excessive fogging

Maintenance and Cleaning

Make sure that the plug is removed from the mains when carrying out
maintenance work or when you want to clean the spray gun or the paint
container.
The spray gun has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operating depends on
proper machine care and regular cleaning.
Clean the spray gun thoroughly after each use.
Perform the following steps after each use:
1. Empty any remaining paint from the container (5).
2. Clean the container (5) thoroughly with thinner.
3. Pour some thinner into the container. Spray until only clean thinner is coming
out of the nozzle.
4. Clean the pick up pipe and the filter (11) with thinner.
5. Clean the basket (6) and the nozzle (8). Remove any paint residues.
Troubleshooting
Poor output adjustment
Not enough paint in the
container, air is sucked
in
Paint has not been
thinned properly, paint is
not passing pick up pipe
completely
Incorrect solvent has
been used
Spray gun is too far from
the surface
Paint is too thick
18
Re-adjust output control
Refill container with
paint
Check pick up pipe and
viscosity level
Use correct solvent
Hold spray gun closer to
the object
Thin the paint