Westfalia JSD80S Instruction Manual page 21

Operation
Never start or stop the spray gun while it is aimed at the surface to be
sprayed.
Evenly control the speed of the movement of the spray gun. A fast movement
over the surface will give a thin coat. A slow speed movement will give a
heavy coat. Apply one coat at a time. Make sure you observe the manufac-
turer's recommended drying time before applying a further coat.
Keep the output control at a low setting when spraying small areas. This will
avoid using too much paint and prevent overspray.
Avoid stopping and starting when spraying an object. This can lead to too
much or not enough paint being applied.
Do not tip the spray gun for more than 45º.
Right
Wrong Right Wrong
16