Configure Dhcp Wan Connection For Internet In Route Mode - C-Data Z EPON HGU User Manual

5.1.2
1.Login ONU's WEB, select Network->WAN->WAN Connection, and then there are
some parameters for us to configure as follows:
Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com

Configure DHCP WAN Connection for Internet in Route Mode

【IP Version】Select 'Ipv4'; If there is Ipv6 in the network, we can select 'Ipv4/Ipv6'.
【Type】Select"DHCP".
【Connection Name】Select "Create WAN Connection".
【 Port Binding 】 Band the physical ports (LAN1-4 Port ) with DHCP WAN
connection. Besides, if user want to use wifi function, must bind
any SSID with DHCP WAN connection, and turn on wireless wifi
function. When user configures wifi function, could refer to
WLAN configuration this chapter.
P11