Aqua Lung CORE Service Manual page 9

ATTENTION: Before continuing, make sure that
you are working on a soft surface in order to
avoid damaging the crown (127585) during
disassembly.
25. Insert the plastic side of the
extraction tool (116236) into the
body's central hole, wet / dry
chamber side. Make sure that the
tool is in contact with the crown
(127585). Press down to remove
the seat.
26. While holding the holding tool (116230), remove the
body protector (128124) at the opposite side of the
tool. Then, unscrew the holding tool.
DISASSEMBLY END
Before starting to re-assemble the regulator,
make sure that all replacement parts have been
cleaned and lubricated in accordance with
Procedure A – Cleaning and Lubricating, page
21.
st
Service Manual Core 1 stage
Rev. 05/2015
Remove the O-ring (124704) from
the seat, using the tool (506001).
st
Service Manual Core 1 stage
9