ZyXEL Communications NAP Series User Manual page 15

Figure 8 NAP303 LEDs
The following table describes the LEDs.
Table 4 NAP303 LEDs
LED COLOR
PWR/SYS Amber
Green
Green
Red
Chapter 1 Introduction
STATUS DESCRIPTION
Slowly blinks amber for The NAP is booting up.
one second and green
for one second
alternatively.
On The NAP is ready for use.
Slow Blinking (on for 1s, The WiFi module of the NAP is disabled or failed.
off for 1s)
On There is system error and the NAP cannot boot up, or the
NAP suffered a system failure.
Fast Blinking (on for The NAP is undergoing firmware upgrade.
50ms, off for 50ms)
Slow Blinking (blink for 3 The Uplink port is disconnected.
times, off for 3s)
NAP Series User's Guide
15