Amana AVZC18 Installation & Service Reference page 14

7. Select CHARGE MODE.
8. Select ON. Press DONE to initiate CHARGE MODE. (System
will then run for 1 hour and either return to cooling or
heating mode depending if the thermostat is set to COOL or
HEAT MODE from the SYSTEM menu on the main screen.
If charging is not complete after 1 hour, repeat
7. and 8.
Refer to STEP 5 and STEP 6 for refrigerant charge
level adjustment.
9. To terminate CHARGE MODE, select CHARGE
MODE screen again. Press OFF. Press DONE to
terminate CHARGE MODE.
10. Once CHARGE MODE is complete and has been
terminated, navigate to HOME screen. Enter
normal operation with temperature offset or thermostat
schedule, as desired.
14
ON