Table of Contents
Advertisement
Getting started
13. Getting started
The HMs700 series touch terminals must be programmed with the programming software HMWIN
Studio (starting from v2.6), a Windows application.
There are two options to transfer a HMWIN application project to a touch terminal:
Ethernet
Connect the touch terminal via the Ethernet interface to a personal computer running
the HMWIN Studio software. Select "Run/Download to target" in HMWIN Studio.
Make sure that the firewall policy is configured in a way that allows HMWIN Studio to
access the network.
USB
Create an update package using the HMWIN Studio software and copy it to a USB
flash drive.
For USB transfer a dedicated accessory cable is required.
22
Advertisement
Table of Contents
