Getting Started; Disposal - Panasonic HMx700 Series Instruction Manual

14. Getting started

The HMx700 series touch terminals must be programmed with the programming software HMWIN
Studio (starting from v2.6), a Windows application.
There are two options to transfer an HMWIN application project to a touch terminal:
Ethernet
Connect the touch terminal via the Ethernet interface to a personal computer running the HMWIN
Studio software. Select "Run/Download to target" in HMWIN Studio.
Make sure that the firewall policy is configured in a way that allows HMWIN Studio to access the
network.
USB
Create an update package using the HMWIN Studio software and copy it to an USB flash drive.
For more details about HMWIN Studio, refer to the help topics in the software.

15. Disposal

Used electrical and electronic products must not be placed in general household waste. For
proper treatment, recovery and recycling of old products, take them to applicable collection
points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any
potential negative effects on human health and the environment.
For more information about collection and recycling, please contact your local municipality.
Dispose of batteries according to local regulations.
ACGM0197V4EN Version 4.0
Getting started
23