Specification - Multiplex SONIC LINER Building Instructions

Sonic Liner
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely
hope that you are happy with the contents of your kit. However, we would ask you to check all the parts before you
start construction, as we cannot exchange components which you have already worked on. If you find any
part is not acceptable for any reason, we will readily correct or exchange it. Just send the component to our Model
Department. Please be sure to include a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the
kit contents in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification.
Please understand that we cannot entertain claims against us if the kit contents do not agree in every respect with
the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and
operating them safely requires a certain level of technical competence and manual skill, together with
discipline and a responsible attitude at the flying field. Errors and carelessness in building and flying the
model can result in serious personal injury and damage to property. Since we, as manufacturers, have
no control over the construction, maintenance and operation of our products, we are obliged to take this
opportunity to point out these hazards, and to emphasise your personal responsibility.
Additional items required:
Radio control equipment:
MULTIPLEX Micro IPD UNI receiver
Tiny S UNI servo (3 x required)
PICO-Control 400 DUO UNI
Extension lead with separation filter (2 x required)
Flight battery:
MULTIPLEX Permabatt 7/3000 mAh flight battery
MULTIPLEX Permabatt 8/3000 mAh flight battery
Battery charger:
MULTIcharger 4010 DC
Adhesive:
MULTIPLEX "Zacki, medium viscosity"
MULTIPLEX "Zacki Activator"
Alternatively you can use any comparable cyano-acrylate adhesive ("medium cyano"). Don't use special styrofoam
cyano. Epoxy glues appear to produce strong joints, but the strength is only superficial and the hard adhesive
tends to break away from the components under stress.
Tools:
Scissors, balsa knife, screwdrivers (2 + 5 mm), 4-5 mm Ø bradawl or small round file

Specification:

Wingspan
Fuselage length
All-up weight
All-up weight
Wing area
Wing loading
RC functions
Separate the illustrated pages from the centre of this booklet.
8
35 MHz
40 MHz
standard - 400 motors / 8 cells
480 motors / 8-9 cells
Aileron, elevator and throttle
Function
Ele. / 2 x Aileron
Speed controller
approx.
approx.
approx.
min. approx.
Order No. 5 5971
Order No. 5 5972
Order No. 6 5121
Order No. 7 5024
Order No. 8 5035
Order No. 15 6026
Order No. 15 6027
Order No. 9 2527
Order No. 59 2720
Order No. 59 2824
1265 mm
1300 mm
1550 g
1650 g
42 dm²
37 g/dm²