Cisco Headset 500 Series Manual page 14

Change Your Headset Ringer Settings
Change Your Headset Ringer Settings
You can change your headset ringtone behavior on Cisco IP Phones with Phone Firmware 14.0 or later. The
setting is saved on the phone and will apply to any Cisco Headset 500 Series that connects.
Procedure
Step 1
Press Applications
Step 2 Select Preferences > Headset ringer.
Step 3
Select a ringer setting.
By default, your phone follows the behavior of the phone ringer settings. Select On if you want to always
hear the phone ring when you have an incoming call. If you select Off, you won't hear any ring through your
headset when there is an incoming call.
Step 4
Select Set to apply your settings.
Update Your Cisco Headset Firmware With a Cisco IP Phone
You can update your headset software on any supported Cisco IP Phone. During a headset firmware upgrade,
you can view the progress on your phone screen.
Procedure
Step 1 Connect your headset to a Cisco IP Phone.
Step 2
If the headset does not automatically begin to update, restart the phone. The phone downloads the latest headset
version file when the phone restarts and uploads it to the headset.
Configure a Headset on the Phone
After you have connected the headset, you may have to configure it on your phone.
Reset Cisco Headset Settings from Your Phone
You can reset your Cisco headset to remove your custom settings. This action returns the headset to the original
configuration set by your administrator.
Your phone must be running Firmware Release 12.5(1)SR3 or later for this feature to function.
Before you begin
Connect your headset to the phone:
• Cisco Headset 520 Series: Connect with the USB adapter
• Cisco Headset 530 Series: Connect with the USB cable
Accessories
14
.
Accessories