Cisco Headset 500 Series Manual page 22

Install the Cisco IP Phone Handset Cover
Step 4
Secure the cover around the corners and side of the phone. The cover should fit securely over the phone
without much resistance.
Step 5 Place the handset back on the cradle.
Install the Cisco IP Phone Handset Cover
A silicone cover helps to protect your handset from damage and reduces the spread of germs.
Procedure
Step 1 Remove the handset from the phone cradle.
Step 2
Disconnect the cable from the handset.
Step 3 Slide the silicone cover over the handset until the ear cup is completely inside the cover.
Step 4
Pull the cover over the other end of the handset.
Step 5
Make sure the cover is flush against the handset and that the cable port is unobstructed.
Step 6 Reconnect the handset to the phone and return it to the cradle.
Clean the Silicone Cover
Clean your cover if you are worried about dirt and grime. A regular cleaning also prevents the spread of
bacteria or germs.
Accessories
22
Accessories