Strong SRT SRT 43UC6433 User Manual page 15

Wireless, using the internal wireless and your home wireless network.
„
NOTE:
NOTE:
Connecting to a wired network
To connect to a wired network
Ensure you have:
1. An Ethernet cable long enough to reach your TV
A router or modem with an available Ethernet port
„
A highspeed Internet connection
„
2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV.
3. Use Ethernet part of menu to configure the connection (if required).
Connecting to a wireless network
To access the Internet, you must subscribe to a highspeed broadband
Internet service with your Internet service provider.
Instructions below are just the usual ways to connect your TV to a wired or
wireless network. The connection method may differ depending on your
actual network configuration. If you have any questions about your home
network, please refer to your Internet service provider.
11