Advertisement
BLUETOOTH MINI A5 (2018):Layout 1 27/03/2018 14:57 Page 5
5. Slowly turn the dial on the shower to
position 2
6. Pairing the shower to the Whale
Instant Match
®
transformer
• Press and release the start/stop button on the shower.
The status light on the shower will now flash blue to indicate
that the shower is in pairing mode.
• The status light on the shower will then flash white and you
will hear an audible beep from the shower to indicate that the
transformer has successfully been paired to the shower.
®
• The Whale
transformer will flash green only to indicate
that it is paired to the Mira
7. Completing the pairing
• Turn the temperature control to full cold and press the
Start/Stop button on the shower. The shower will now
return to normal standby mode.
• You may now follow the "Post Installation Procedure" in
the Mira ® Advance Flex Extra (J09N) Instruction Manual
(page 25) if necessary.
®
shower.
Plu
Advertisement
