Advertisement
BLUETOOTH MINI A5 (2018):Layout 1 27/03/2018 14:57 Page 4
2. Transformer set up
• Switch the mains electric supply to the transformer
ON and wait to hear the audible beep from the transformer.
The light on the transformer will now flash red to indicate
®
that a Bluetooth
connection has not yet been established.
• Press and HOLD the blue test button on the transformer
until the light flashes red and green to indicate that the
transformer is now in pairing mode.
NOTE: You now have 120 seconds to pair the transformer
to the shower.
3. Shower set up
• Ensure that the electric supply to the shower is turned OFF.
Then turn the dial on the shower to FULL COLD.
4. Configuring the shower
• Switch the mains electric supply to the shower ON, Start/Stop
button will illuminate.
• Within 10 seconds press and HOLD the Start/Stop button on
the shower until the Start/Stop light on the black button goes off.
Advertisement
