Ecco Pro Vantage 12+ Series Installation And Operation Instructions Manual page 8

Advanced Controller (EZ1202)
Provides convenient control of the lightbar's built-in flash patterns and features soft touch buttons and LED function indicator lights.
12+ PRO ADVANCED CONTROLLER FUNCTIONS
ECCOESG.com
Cruise
Left Alley
Left Cut
"Power" - Press to cycle through three programmable flash pattern presets. Hold button down to shut down all functions.
Press again to resume.
"Cruise" - Press to illuminate all directional modules in steady burn mode.
"Dim Mode" - Toggle press to dim standard flash patterns. Note, this mode will not dim takedown, alley and worklights.
Long-press this button for two seconds to activate or deactivate backlighting on the contrl head.
No Functionality
"Flash Pattern Select" - First, select Pattern 1, 2 or 3 to program by pushing the Power Button.
Toggle Press /
Dim
Take Down
Back Lighting
Front Cut
Safety Director
On/Off
Off
Next, double press to enter flash pattern select mode and cycle one flash pattern. The 4 corner
LEDs on the controller will mimic the lightbar to give pattern feedback. Press again once to cycle
to the next flash pattern. Press and hold for 3 seconds to return to the prior flash pattern. The
lightbar will store the last flash pattern used to the active preset. After 30 seconds of inactivity
in Select mode, the control head will automatically exit Select mode.
Press for 2 Seconds
Select
No
Program
Functionality
Flash Patterns
Work Light Safety Director
Rear Cut Pattern Select
Pattern 1 Pattern 2
P/N EZ1202
Flash Pattern 1
Flash Pattern 2
Flash Pattern 3
Right Alley
Right Cut
Pattern 3
Page 8 of 14