Ecco Pro Vantage 12+ Series Installation And Operation Instructions Manual page 10

Advanced Control Pad Mounting: BRACKET
The advanced control pad is supplied with three mounting op-
tions: a bracket, VHB tape and hook and loop patch. The rear
of the control pad is designed to allow for the cable exit to be
routed five different ways to maximize installation locations.
HOOK AND LOOP
PATCH
Mount the control pad in a location within convenient reach of
the operator so that s/he can operate the system without losing
eye contact with the roadway.
TAPE
Advanced Controller Mount (EZ1415):
This holder can easily be mounted in the cab of a vehicle us-
ing the attached suction cup. Control head is placed inside
the grips. The angle of the holder can be changed using the
adjustable knobs.
Page 10 of 14