Do not fold, bend or place a heavy object on the au Micro IC
Card (LTE). Do not drop the au Micro IC Card (LTE) or subject
Don t
it to strong impact. Doing so might cause loss of data or a
fault.
Do not scratch the IC (metal) part of the au Micro IC Card
(LTE). Doing so might cause a fault.
Don t
Do not store the au Micro IC Card (LTE) in dusty places. Doing
so might cause a fault.
Don t
Do not store the au Micro IC Card (LTE) in places exposed to
direct sunlight or hot and humid places. Doing so might cause
Don t
a fault.
Do not leave au Micro IC Card (LTE) in places within the reach
of small children. Failure to do so might cause injury, etc. if
Don t
they accidentally swallow and choke on it.
Handling precautions
These precautions are provided to ensure that performance
can be fully demonstrated. Thoroughly read these
precautions to ensure correct use.
■ Precautions common to the FJL21 main unit, battery
pack, charging equipment, au Micro IC Card (LTE),
peripheral devices
●
To ensure waterproof property (equivalent to IPX5 and IPX8) and
dustproof property (IP5X) of the FJL21, use the FJL21 with the
battery cover and external connection terminal cover tightly closed.
Note that the waterproof property is not guaranteed in every usage
condition. FJL21 Do not allow water to get inside the FJL21 or
splash water on the battery pack, desktop holder or optional
accessories. The supplied and optional accessories are not
waterproof. Do not attach/remove the battery cover or open/close
the external connection terminal cover or battery cover in the rain or
with water drops on the surface of the product. Doing so might
cause water intrusion resulting in internal corrosion. Malfunctions
determined to be caused by water intrusion are not covered by the
warranty.
●
The display or internal substrate might be damaged if it is subject
to forcible impact resulting in a fault. Do not sit down with the
product in a pocket of trousers or skirt or place the product under
the heavy object in a bag. Such damage and malfunction are not
covered by the warranty, even if there is no external damage.
●
Display of the FJL21 uses hardened glass, however if it is subject
to forcible impact or a hard shock, it might break. If the display is
cracked or damaged, stop using and do not touch the damaged part
with your hands.
●
Do not use the product in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5℃ to 35℃ and
humidity range of 35% to 85%.)
− Charging equipment
− Cables
●
Do not use the product in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5℃ to 35℃ and
humidity range of 35% to 90%. Temporary use at 36℃ to 40℃ is
allowed.)
− FJL21 main unit
− Battery pack, au Micro IC Card (LTE) (attached to the FJL21
main unit)
●
Do not use in places subject to lots of dust or vibration.
●
Clean the charging terminals with dry cotton swabs, etc. every now
and then. Soiled terminals might cause poor connection. Do not
exert a strong force to clean the charging terminals to prevent
deformation.
●
When the product is dirt, wipe with a soft dry cloth. Wiping the
product using benzene, thinner, alcohol, detergent, etc. might erase
the printing on the outer casing or cause discoloration.
●
Use as far away as possible from household appliances (TVs,
speakers, etc.). Use nearby might affect them.
●
The FJL21 may become warm while calling, using an application, or
charging, depending on the situation, but this is not abnormal.
●
Do not subject to strong impact to the fingerprint sensor, or
scratch its surface. It may cause not only malfunction of the
fingerprint sensor but also disabling authentication.
13