Programming Doses; Programming Coffee Doses - Nuova Simonelli OSCAR II Service Manual

2.3

PrOGraMMinG DOSeS

Carry out the following operations to enter into
programming mode:
nOTe
Operation to be carried out with the machine
switched on.
To enter into programming mode, press the
two coffee dispensing button for 5 seconds.
The dispensing buttons start to flash.
nOTe
After 30 seconds of inactivity (no buttons pressed)
in programming mode, the machine returns to
normal mode and no data is memorised.

PrOGraMMinG cOFFee DOSeS

To programme the dose of water relative to one of the
dispensing buttons, proceed as follows:
Fill the filter holder with the correct dose of coffee (the
filter holder can be single or double depending on the
button to be programmed).
Place the filter holder into the unit.
Press one of the dispensing buttons.
Dispensing starts; once the desired quantity has been
reached press the same button again.
To exit from the programming mode and memorise
the desired doses, keep the
at least 5 seconds; the buttons stop flashing.
2.6
Service Manual
Fig. 18
Fig. 19
button pressed for
AUTORYZOWANY DYSTRYBUTOR
w w w . s i m o n e l l i g r o u p . p l
Ed. 02 of 09/2016