Related Manuals for Nuova Simonelli Oscar II U
Summary of Contents for Nuova Simonelli Oscar II U
-
Page 1: User Manual
6.2.2017 Nuova Simonelli Oscar II User Manual Oy Gustav Paulig Ab, Satamakaari 20, FI-00980 Helsinki, Finland Tel +358 20 737 0005 | professional.huolto@paulig.com | www.pauligprofessional.fi COFFEE DIVISION Y-tunnus 0835291-6 OF PAULIG GROUP... - Page 2 Nuova Simonelli Oscar II User Manual INDEX 1. Basic information 1.1 Safety instructions, page 3 1.2 Specification, p. 4 1.3 Cleaning agents and accessories required, p. 4 1.4 Machine parts, p. 5 1.5 Front panel, p. 5 2. Using the machine 2.1 Starting the machine, p.
-
Page 3: Dear Customer
Nuova Simonelli Oscar II User Manual Dear customer, thank you for selecting a Nuova Simonelli coffee machine. Please read this manual through carefully before using the machine and pay special attention to the safety instructions. Keep this user manual stored together with your machine. - Page 4 Nuova Simonelli Oscar II User Manual 1.2 Specifications Country of origin: Italy Voltage: 230 V Power: 1200 W Water connection: 5l tank or ¾” direct water connection Width: 300 mm Height: 400 mm Depth: 408 mm Installation width: 300 mm...
-
Page 5: Machine Parts
Nuova Simonelli Oscar II User Manual Machine parts Steam wand switch 8. Drip tray grid 2. Cup warmer 9. Group handle 3. Water tank 10. Steam wand 4. Water tank lid 11. Steam wand protection cover 5. Main power switch 12. -
Page 6: Using The Machine
Nuova Simonelli Oscar II User Manual 2. Using the machine 2.1 Starting the machine Place the machine on an even and stable surface. Switch the machine on from the main power switch. Fill the water tank with fresh cold water. Press the standby mode button for a few seconds to start the machine. Once the indicator light for the boiler heating is no longer lit, the machine is ready for use. - Page 7 Nuova Simonelli Oscar II User Manual 3. Reinsert the portafilter to the machine and press any product button. Wait for ten seconds and press the same button again to stop the water flow. Wait for 10 seconds and repeat this step three times.