DEEP SEA ELECTRONICS DSEGenset DSE6110 MKIII Operator's Manual page 57

NOTE: For further details, see section entitled Operation elsewhere in this manual.
Icon Description
Transfer To Generator
The Transfer to Generator
switch is only active in the Manual Mode
Pressing the Transfer to Generator
and off load, the Mains load switch is opened ('Close Mains' becomes inactive)
and the Generator load switch is closed ('Close Generator' becomes active).
Further presses of the Transfer to Generator
Open Generator (DSE6110 MKIII Only)
The Open Generator
allows the operator to open the generator load switch.
Pressing the Open Generator
generator load switch is opened ('Close Generator' becomes inactive). Further
presses of the Open Generator
Transfer To Mains (DSE6120 MKIII Only)
The Transfer to Mains
and is only active in Manual Mode
Pressing the Transfer to Mains
load, the generator switch is opened ('Close Generator' becomes inactive) and
the mains switch is closed ('Close Mains' becomes active). Further presses of the
Transfer to Mains
Description of Controls
button controls the operation of the generator load
button when the Generator is available
button is only active in the Manual Mode
button when the Generator is on load, the
button have no effect.
button controls the operation of the mains load switch
.
button when the Mains is available and off
button have no effect.
Page 57 of 148
once the generator is available.
button have no effect.
057-289 ISSUE: 1
and