Table of Contents
Advertisement
Registering Your AVC-1100
To ensure your eligibility for support and upgrades, and to qualify
for future promotions, please register your AVC-1100 on the
Adaptec website at
Troubleshooting Your AVC-1100
If you encounter difficulties installing or using your AVC-1100,
follow these suggestions:
Ensure that your analog video device is connected, powered on,
and set up to provide a video signal to the AVC-1100.
Double-check all cable connections.
Try connecting to a different USB port on your system.
If your AVC-1100 is connected to a USB hub, try connecting it
directly to a system USB port. (Adaptec highly recommends that
you connect directly to your computer, and not through a USB
hub.)
Ensure that the AVC-1100 is connected properly and that the
drivers have installed correctly. (See
page 5
to find detailed instructions.)
Technical Specifications
Technology
Video Input
Video Capture Format
Video Standards
Audio Input
PC Interface
Form Factor
Power
Regulatory Certifications
register.adaptec.com
USB 1.1
Composite (RCA)
Compressed AVI
NTSC and PAL
3.5 mm Stereo Jack
USB 1.1 Connector
2.8" (L) x 4" (W) x 0.9" (H)
3.3 V, supplied by USB
FCC Class B, CE Class B
(See
page viii
Registering Your AVC-1100
.
Installing the Drivers on
for more information.)
31
Advertisement
Table of Contents
