Using Et 200Sp Higher Than 2 000 M Above Sea Level; Ambient Temperature And Installation Altitude - Siemens SIMATIC ET 200SP Product Information

Using ET 200SP higher than 2 000 m above sea
level.
3.1

Ambient temperature and installation altitude

Extension of the temperature range and the installation altitude
The previously permissible range of ambient temperature of 0 °C to 60 °C has been extended
for a large number of modules to range of ambient temperature of -30 °C to 60 °C or -25 °C to
60 °C (in each case without condensation or icing). In addition, depending on the module,
the permitted installation altitudes has been extended to installation heights of up to
5 000 meters.
The accessory components offered for ET 200SP (labeling strips, shield terminals, mounting
rails, front connectors, etc.) can also be used down to -30 °C and for altitudes up to 5 000 m.
The following tables show an overview of the current climatic ambient conditions for
ambient temperature and installation altitude of modules of the ET 200SP product family.
Reference
The current status of the respective modules can be found in the online published technical
specifications.
In general, the module-dependent extended climatic operating conditions are described in
the "Technical specifications" section of the respective modules in the equipment manuals.
Constraints on operation of ET 200SP at altitudes > 2 000 m are described in SIMATIC
ET 200SP Distributed I/O System
(https://support.industry.siemens.com/cs/ww/en/view/58649293).
Currently valid markings and approvals
Note
Information on the components of ET 200SP
The currently valid markings and approvals are printed on the ET 200SP modules.
The fail-safe CPUs are certified for use in safety mode up to 3 000 m or 5 000 m. All other
markings and approvals are currently based on an altitude of up to 2 000 m.
Product information on the documentation of the ET 200SP distributed I/O system
Product Information, 02/2021, A5E03799595-BG
3
63