Ars And Service Switches; Installing Or Replacing Sam Cards - VeriFone UX301 Installation Manual

ARS and Service
Switches
Removal Protection
CAUTION
System Mode
Activation
Installing or
Replacing SAM
Cards
CAUTION
The following illustrations show the locations of the Anti-Removal Switches (ARS)
and the service switch on the UX301.
Figure 4 UX301 ARS and Service Switches
The front Anti-Removal Switches detect any removal attempt from the device
cabinet and disables the PIN processing functionality. Re-installation requires an
authorized process. Please contact your Verifone representative for details.
Make sure the installation method does not invalidate the Anti-Removal Switch
(ARS) function. Do not, for instance, install the UX301 in a sub-chassis that can
be removed from the main cabinet.
The rear service switch provides administrators System Mode access to the
UX301. System Mode is restricted to administrators and authorized users only.
Please contact your Verifone representative for details.
You may need to install a security access module (SAM) card or replace the old
card. You can find three SAM slots on the UX301 (see
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. Verifone recommends using
a grounded anti-static wrist strap.

ARS and Service Switches

ANTI-REMOVAL
SWITCHES (ARS)
SYSTEM MODE
SERVICE SWITCH
Figure 3).
UX301 I G
NSTALLATION
S
ETUP
13
UIDE