How To Use The Hair Dryer - Panasonic EH-ND21 Operating Instructions Manual

How to use the hair dryer

Select the intensity of the airflow with the main switch.

Notes
If you want to dry your hair quickly, set the quick-dry nozzle in the
direction shown in the illustration.
Repair and maintenance of the hair dryer
Only qualified personnel should repair or disassemble the hair dryer.
If the cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid a hazard.
If the cord or plug is damaged, stop using it immediately and contact an
authorized Panasonic service center.
When the hair dryer is blowing hot air, occasionally air may turn cool or
sparks may be seen. In such cases, dust may have accumulated at the
air inlet and/or the air outlet. Also, the air inlet may be being blocked by
your hair, hands, etc. (This phenomenon is the result of the hair dryer's
thermal switch. The sparks do not pose a danger in and/or themselves.)
Slide the main switch to the "0" position and remove any dust that has
accumulated.

Maintenance of air outlet and air inlet (once a month or
more)
To clean the air outlet, set the main
switch to "1", and rake out with a
brush while cool air is blowing out.
To clean the air inlet, set the main
switch to "0" and, with the airflow
stopped, remove dust and hairs using
a brush or vacuum cleaner.
Be careful since dust may spray out.
When dust clogs the mesh, the thermostat switch will operate,
frequently switching to cool airflow and reducing the drying/set
performance.
5