Table Of Contents; Before You Begin - Adaptec RAID 2410SA Hardware Installation Manual

2410SA Enclosure Kit HIG.fm Page 1 Thursday, October 23, 2003 1:20 PM
In this Guide...
Before You Begin
Installing the Drive Carriers
Labelling the Drive Carriers
About the Drive LEDs
Installing the Drive Chassis
Hot-swapping Disk Drives
Technical Specifications
This Hardware Installation Guide explains how to set up the 4-bay
hot-swappable drive chassis included in the Adaptec
Enclosure kit. It also describes how to install and hot-swap hard
disk drives.

Before You Begin

Ensure you have these items from the Adaptec 2410SA Enclosure
kit before beginning the installation:
Adaptec 2410SA Enclosure drive chassis
Four drive carriers
Four SATA cables
SATA LED cable
Bag of screws and labels
You will also need a screwdriver during installation.
®
2410SA
1
1
2
3
3
3
6
7